Bosch WLX20061BY Gebrauchsanweisung - Seite 2
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Bosch WLX20061BY herunter. Bosch WLX20061BY 8 Seiten.
Seite drucken
– Risk of electric shock!
Cleaning and care
Cleaning and care
Pull out the mains plug!
– Risk of explosion! No solvents!
Clean machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use abrasive detergents.
1. Open and remove the maintenance cover.
– Immediately remove washing and cleaning agent residue.
– Do not clean the appliance with a water jet.
Clean the detergent drawer ...
2. Carefully unscrew the pump cover - do not remove it completely.
... if it contains detergent or fabric softener residue.
1. Pull out, depress the insert and remove the drawer completely.
3. Let the water drain into a shallow container (let the remainder drip
4. Remove the pump cover. Remove foreign material/fluff from inside the
2. Remove insert: Press the insert upwards with your finger.
3. Clean the detergent dispenser and the insert with water and a brush.
4. Refit the insert and secure in place.
5. Clean the interior, pump cover thread and pump housing
5. Insert the detergent drawer.
Leave the detergent drawer open so that residual water can evaporate.
6. Refit the pump cover and screw on tightly.
Drum
Leave the washing machine door open so that the drum can dry.
7. Insert the maintenance cover and close it.
Rust stains – use chlorine–free cleaning agent, not steel wool.
Descaling
No laundry in the machine!
This should be not be necessary if the detergent is dispensed correctly. However, follow
the instructions of the descaler manufacturer .
Frost protection
If the washing machine is located in a room which is exposed to freezing temperatures, any
residual water in both the pump and the water inlet hose must be drained every time after the
1. Turn off the tap.
machine is used.
2. Select any programme (except Spin
– Draining the pump
Page 9 Detergent solution pump
3. Press Start/Pause
– Draining the water inlet hose:
4. Set the programme selector to Off . Pull out the mains plug.
1. Turn the tap off.
2. Unscrew the hose from the tap and the rear of the appliance, drain out the water left inside
the inlet hose.
1. Remove the hose from the tap.
3. Before the next wash, screw the hose back on and check for leaks.
2. Reconnect the hose and check for leaks.
8
7
– Risk of scalding! Allow detergent
Technical specifications
solution to cool down!
– Turn off the tap!
Detergent solution pump
1
– Set the programme selector to Off , pull out the mains plug.
2
onto a floor cloth). Repeat the operation until there is no water left.
a
pump.
2
1
(fan impeller in the detergent solution pump must be able to rotate).
Customer service
Before calling the customer service, please check whether you can eliminate the fault yourself
page 11 What to do if...
If yor require advice, even during the warranty period, you will incur the costs for the callout
To prevent unused detergent from flowing into the outlet during the next
of a technician.
wash: pour 1 litre of water into dispenser II and start the Spin
programme.
The contact details for all countries can be found in the enclosed after-sales service directory
When calling customer service, please give the details of your address, telephone number,
Filter in the water inlet hose
fault description, purchase date, product number (E-Nr.) and the production number (FD) of
the appliance to prevent unnecessary call-outs. This will save your additional costs.
Reduce the water pressure in the supply hose:
E-Nr .
and Empty
).
Product number
. Leave programme running for approx. 40 seconds.
Rely on the professionalism of the manufacturer. Please contact us.
Clean the filter:
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
Clean the filter with a small brush.
or
Remove the hose from the rear of the appliance.
Remove filter with pliers and clean.
9
What to do if ...
Water is running out.
– Fit/refit drainage hose.
– Tighten screw–fitting on the supply hose.
Water not flowing in.
– Tap not open?
a= 600 mm
Detergent not washed in.
– Filter blocked? Clean filter
b= 400 mm
The
(Ready) and
(End)
– Water inlet hose kinked or jammed?
indicator lights flash.
c= 850 mm
c
Washing machine door cannot be
– Safety function active. Programme stopped?
opened.
– Water in drum? Select Spin
Net weight: 60kg
Programme does not start.
– Start/Pause
The
(Ready) and
(Rinse)
– Washing machine door not closed properly.
indicator lights flash.
Detergent solution is not drained.
– Clean detergent solution pump
The
(Rinse) and
(End)
– Clean outlet pipe and/or drainage hose.
b
indicator lights flash.
Additional function could not
– Can the additional function be selected?
activate for selected programme.
Water not visible in the drum.
– Not a fault - water below the visible area.
Spin cycle actuated several times. – Not a fault - unbalanced load detection system adjusts
Detergent in chamber I is not
–
washed away.
Detergent residue in the detergent
– Detergent is damp or lumpy, clean the detergent
dispenser
– Use the dosing aid for liquid detergent.
Foam is coming out of the
– Too much detergent used?
detergent drawer.
– Reduce detergent dosage for the next wash cycle.
Excessive noise, vibrations and
– Appliance feet fixed?
"wandering" during spin cycle.
– Transportation bolt removed?
These numbers are shown on the rating plate
Indicator lights do not function
– Power failure?
which can be found on the frame of the open
while the appliance is running.
– Circuit breaker tripped? Reset the circuit breaker/
FD
door and also on the rear of the appliance.
– If the fault occurs repeatedly, contact customer service.
Production number
Programme sequence longer than
– Not a fault-unbalanced load detection system is
usual
– Not a fault - foam detection sysytem active.
Detergent residues on the laundry – Occasionally, phosphate-free detergents contain water-
– Select Rinse
Washing result not satisfactory
– Soiling is greater than expected? Select a suitable
– Detergent is underdosed?
If you cannot correct a fault yourself or a repair is required:
– Set the programme selector to Off and pull the mains plug out of the socket.
– Turn off the tap and call the customer services.
10
Page 9.
or Empty
.
not selected.
Page 9.
Page 7,
programme overview.
imbalance.
+ Prewash
60
programme not selected ?
dispenser
Page 8.
Mix 1 tablespoon of fabric conditioner with ½ a litre of
water and pour into dispenser II in the detergent drawer.
Secure appliance feet
Installation instructions.
Remove transportation bolt
Installation instructions.
change the fuse.
Washing machine
WLX20061BY
adjusting the imbalance by repeatedly distributing the
laundry .
insoluble residues.
or blush the laundry after washing.
programme or reduce load.
en Instruction manual
11