Drawmer 1968 MKII Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kompressor Drawmer 1968 MKII herunter. Drawmer 1968 MKII 10 Seiten. Dual channel vacuum tube compressor

Seite drucken
It is the responsibility of the installer to ensure that the continuous power rating of the speakers is not exceeded, as Drawmer
Electronics Ltd will not accept any responsibitlity for speaker damage caused by incorrect settings.

IF A FAULT DEVELOPS

For warranty service please call Drawmer Electronics Ltd. or
their nearest authorised service facility, giving full details of
the difficulty.
A list of all main dealers can be found on the Drawmer
webpages.
On receipt of this information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the warranty without
prior consent from Drawmer or their authorised representative.
For service claims under the warranty agreement a service
Returns Authorisation (RA) number will be issued.
Write this RA number in large letters in a prominent position
on the shipping box. Enclose your name, address, telephone
number, copy of the original sales invoice and a detailed
description of the problem.
Authorised returns should be prepaid and must be insured.
All Drawmer products are packaged in specially designed
containers for protection. If the unit is to be returned, the original
container must be used. If this container is not available, then
the equipment should be packaged in substantial shock-proof
material, capable of withstanding the handling for the transit.
1968
MkII
INPUT IMPEDANCE
Input Impedance
Maximum Input Level
OUTPUT
Output Impedance
Maximum Output Level
BANDWIDTH
UNITY GAIN NOISE
22Hz - 22kHz (RMS)
CROSSTALK
8
GENERAL INFORMATION
DUAL CHANNEL VACUUM TUBE COMPRESSOR
DATA SPECIFICATION
20k Ohms
+20dBu
50 Ohms
+21dBu
<17Hz to 28kHz -1dB
<10Hz to 47kHz -3dB
-85dB
better than 70dB @ 10kHz
better than 100dB @ 1kHz
DRAWMER 1968

CONTACTING DRAWMER

Drawmer Electronics Ltd., will be pleased to answer all
application questions to enhance your usage of this
equipment. Please address correspondence to:
Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK
Alternatively contact us by E-mail on :
Further information on all Drawmer dealers, Authorised service
departments and other contact information can be obtained
from our web pages on:
http://www.drawmer.com
DISTORTION (THD & Noise)
Line Input with BYPASS selected
Line Input with NORMAL selected
POWER REQUIREMENTS
230Volt or 115V at 50-60hZ, 13VA
FUSE RATING
160mA for 230Volt, 315mA for 115Volt
Conforming to IEC 127-2
FUSE TYPE
20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE
482mm (W) x 44mm (H) x 225mm (D)
WEIGHT
O
M
MkII
PERATOR'S
ANUA
CHAPTER 3
1kHz
<0.01%
<0.35%
4Kgs
L