Bosch 6 Series Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Backofen Bosch 6 Series herunter. Bosch 6 Series 16 Seiten. 2 door top freezer, inox-easyclean
Auch für Bosch 6 Series: Benutzerhandbuch (24 seiten), Handbuch für Installation und Gebrauch (20 seiten), Handbuch für Installation und Gebrauch (20 seiten), Handbuch für Installation und Gebrauch (20 seiten), Gebrauchsanweisung und Installationsanleitung (48 seiten), Gebrauchsanweisung (16 seiten), Gebrauchsanweisung (48 seiten), Installationsanleitung Handbuch (27 seiten), Gebrauchsanweisung (12 seiten), Installations- und Betriebsanleitung (36 seiten), Handbuch für Installation und Gebrauch (16 seiten), Gebrauchsanweisung Handbuch (29 seiten), Benutzerhandbuch und Installationsanleitung (16 seiten), Informationen zur Verwendung (32 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Informationen zur Verwendung (28 seiten), Benutzerhandbuch (23 seiten), Gebrauchsanweisung (24 seiten), Montage- und Gebrauchsanweisungen (24 seiten), Informationen zur Verwendung (16 seiten), Benutzerhandbuch (36 seiten), Benutzerhandbuch (32 seiten), Benutzerhandbuch (28 seiten), Benutzerhandbuch (28 seiten), Gebrauchsanweisung (28 seiten), Informationen zur Verwendung (20 seiten), Gebrauchsanweisung (28 seiten)

Bosch 6 Series Gebrauchsanweisung

Before using the oven for the first time

In this section, you can find out what you must do before using
your appliance to prepare food for the first time. Read the
Safety information section beforehand.
Remove the appliance packaging and dispose of it
appropriately.

Setting the clock

After the appliance has been connected to the mains or after a
power cut, three zeros and the "A" symbol flash on the display.
Press the
button until the dot flashes on the display.
0
1.
Set the current time with the "+" and "-" buttons.
2.
After seven seconds, the time that has been set is adopted.
Note: To change the set time, press the "+" and "-" buttons until
the dot flashes on the display. Then set the current time with the
"+" and "-" buttons.

Baking out the oven

Precleaning the oven
Remove the accessories and the hook-in racks from the
1.
cooking compartment.
Completely remove any leftover packaging, e.g. small pieces
2.
of polystyrene, from the cooking compartment.

How to operate your oven

Pop-out operating controls
The function selector and the temperature selector can be
popped out. Press the operating control in question to pop it in
or out.

Switching on the oven

Use the function selector to set the heating function. An
1.
acoustic signal sounds.
Use the temperature selector to set the temperature.
2.
The oven begins to heat up.
Switching off the oven
Turn the function selector and temperature selector to the off
position.
Changing settings
The heating function and temperature or grill setting can be
changed at any time using their respective selectors.
Heating up
To heat up the cooking compartment as quickly as possible,
use the "Circulated air" heating function. If the set temperature
has been reached (indicator light has gone out), set the
required heating function.
Some parts are covered with a protective film. Remove this
3.
scratch protection film.
Clean the outside of the appliance with a soft, damp cloth.
4.
Clean the cooking compartment with hot soapy water.
5.
Heating up the oven
To remove the new cooker smell, heat up the oven when it is
empty and closed.
Turn the function selector to the Top/bottom heating
1.
operating mode.
Turn the temperature selector to the maximum temperature.
2.
Switch the oven off after 40 minutes.
3.
Note: When the appliance is heating up for the first time, you
may hear crackling noises coming from the oven.
Recleaning the oven
Clean the cooking compartment with hot soapy water.
1.
Refit the hook-in racks.
2.

Cleaning the accessories

Before using the accessories, clean them thoroughly using a
cloth and warm soapy water.

Operating the electronic clock

In addition to the clock time and remaining time, the following
symbols may appear on the display:
Symbol
Meaning
Dot between the displayed hours and minutes.
û
Flashes when it is possible to set the clock time.
Timer
V
Displays the operating statuses for the timer.
Automatic mode
A
Displays the operating statuses for Automatic
mode.
Operating readiness
Û
If this symbol is displayed, the oven is ready to
use.
Setting the time on the clock
After the appliance has been connected to the mains or after a
power cut, three zeros and the "A" symbol flash on the display.
Press the
0
button until the dot flashes on the display.
1.
Set the current time with the "+" and "-" buttons.
2.
After seven seconds, the time that has been set is adopted.
Note: To change the set time, press the "+" and "-" buttons until
the dot flashes on the display. Then set the current time with the
"+" and "-" buttons.
7