AirStage UTY-CGGY Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Fernsteuerung AirStage UTY-CGGY herunter. AirStage UTY-CGGY 9 Seiten. Air conditioner remote controller (wired type)

Seite drucken

PREPARATION

To set the current day and time
1
CLOCK ADJUST
Press the "
PROGRAM/
2 seconds or more. The time display on the remote control-
ler will flash.
3
Decrement Increment
Press the "
" button or "
Press repeatedly to adjust the current time in 1-minute increments. Press and
hold to adjust the current time in 10-minute increments.
* Hold down the "
" button or "

OPERATION

• It is possible to make the operation settings for all indoor units or individual units.
To turn on all indoor units
To turn off all indoor units
To turn the corresponding indoor unit on or off
To select the indoor unit
Press the "
This shows the operating status and timer
operation status for each of the indoor units.
The
* If all indoor units are selected, all of the registered indoor units are controlled at the same time.
* If all indoor units are selected,
The initial values for air conditioning when all selection are set to "Stop, COOL, 26 °C (80 °F), HIGH"
regardless of operation setting of the indoor unit. Accordingly all indoor units will be stopped when it
is operated without pressing the "
En-3
CLOCK ADJUST" button for
M
ex. Monday 10:00 (12-hour display)
" button to set the current time.
" button to adjust the time quickly.
Press the "
ALL" button to turn on all of the indoor units.
* ALL ON cannot be set within 4 minutes after the start up.
* When ALL ON starts up, the setting of each indoor unit is operated already.
Press the "ALL
" button to turn off all of the indoor units.
* ALL OFF cannot be set within 4 minutes after the start up.
Press the "ON/OFF" button to turn the corresponding indoor unit on or off.
" button to select the indoor unit.
1st indoor unit
2nd indoor unit
for the selected indoor unit lights, and the operating status is displayed.
2
DAY
S
M
(SUN)
(MON)
(TUE)
8th indoor unit
: On
: Selection
appears on the Timer and Clock Display.
" button.
Press the "
DAY" button and se-
lect the current day.
A
appears around the selected
day.
T
W
T
F
(WED)
(THU)
(FRI)
4
CLOCK ADJUST
Press again the "
PROGRAM/
CLOCK ADJUST" button to end.
All indoor units
: Off
: Timer operation
S
(SAT)