Bosch HB331 0J Series Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Backofen Bosch HB331 0J Series herunter. Bosch HB331 0J Series 24 Seiten.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Unhooking the rails

Hold the shelf frames from underneath and pull slightly

forward. Pull the extension pins at the bottom of the rails out

of the mounting holes (Fig. A).

Then fold the rails upwards and carefully remove them

(Fig. B).

Clean the rails with washing-up liquid and a sponge. For

stubborn deposits of dirt, use a brush.

Installing the frames

Insert the two hooks carefully into the upper holes. (Figure A-

Incorrect assembly!

Never move the frame before the two hooks are fully

anchored in the upper holes. The enamel could be damaged

and may break (figure C).

the two hooks must be inserted fully into the upper holes.

Now move the frame slowly and carefully downwards and

insert in the lower holes (figure D).

Insert both frames into the side walls of the oven (figure E).

If the rails are fitted correctly, the distance between the two

upper shelf positions is greater.

For cleaning purposes and to remove the door panels, you can

detach the oven door.

The oven door hinges each have a locking lever. When the

locking levers are closed (figure A), the oven door is secured in

place. It cannot be detached. When the locking levers are open

in order to detach the oven door (Fig. B), the hinges are locked.

They cannot snap shut.

Risk of injury!

Whenever the hinges are not locked, they snap shut with great

force. Ensure that the locking levers are always fully closed or,

when detaching the oven door, fully open.

Detaching the door

Open the oven door fully.

Fold up the two locking levers on the left and right (figure A).

Close the oven door as far as the limit stop. With both hands,

grip the door on the left and right-hand sides. Close the door

a little further and pull it out (figure B).

(