Electrolux 816 Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für Waschmaschine Electrolux 816 herunter. Electrolux 816 23 Seiten.

Seite drucken

Spin

NOTE: During certain spin cycles the washing machine will pulse the

Selecting spin ONLY,

Bio Soak

Drip Dry

You can select from 3 different spin speeds to suit the clothes in

your wash load.

Pressing the SPIN button repeatedly will change the spin speed

from

LOW-->MED.-->HIGH-->LOW

The spin speed can be selected while the washing machine is in the

pause mode or when programming a favourite cycle.

The spin speed is not applicable for the DRIP DRY cycle.

The indicator lights will show the spin speed that has been selected

at each press of the button.

Recommended Spin Speeds are;

Woollens------LOW, Delicates------MEDIUM, Cottons------HIGH

motor to maintain the required speed, this is a normal function.

1. Switch on the POWER

2. Press the wash pad

3. Press the ADVANCE pad until only the Progress Indicator SPIN

light is 'ON'.

4. Press START/PAUSE, the washing machine will pump any water

out first and then start a spin cycle.

This option allows you to take advantage of Bio-Detergents that use

enzymes to assist in stain removal.

For these detergents to be most effective, they require extended

soaking times and warm to hot wash temperatures.

After you have selected the wash cycle, load size etc. press the BIO

SOAK button to select the soak time required.

eg.

30mins.-->60mins.-->120mins.-->off.

The indicator lights will show the selected time.

Then press START/PAUSE to start the cycle.

The extra soak time is added to the wash programme time as

shown in the electronic display.

The washing machine will stop after the first agitation cycle and the

selected BIO SOAK time light will flash.

During this soak time the washing machine will agitate the wash load

at predetermined intervals to optimise the effect of the detergent.

When the wash cycle re-commences the BIO SOAK light will be 'ON'.

Select this programme only for items that are to be taken out of the

washing machine dripping wet. The Drip Dry programme does not

have a spin cycle and deep rinse is automatically selected.

etc.

How to use the DRIP DRY option

1. Press POWER on.

2. Press the WASH pad until the DRIP DRY

light is 'on'.

3. Select other options. Note: Spin speed

and Eco Rinse are not selectable.

4. Press START/PAUSE, wash cycle will start.

At the end of the deep rinse the washing

machine will stop and the DRIP DRY light will

flash.

The Electronic Display will show 'dd' and a time

in minutes will be shown alternately, and the

washing machine will 'beep'.

5. Open the lid, Remove the drip dry clothes.

6. To drain the remaining water from the

washing machine simply close the lid.