Electrolux EFDE210TIW Handbuch für Gebrauch und Pflege - Seite 13
Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Waschmaschine Electrolux EFDE210TIW herunter. Electrolux EFDE210TIW 18 Seiten. Front load dryer
Auch für Electrolux EFDE210TIW: Handbuch für Gebrauch und Pflege (29 seiten)
Seite drucken
IMPORTANT
Clean the lint filter and dump water container after every load.
IMPORTANT
Do not store or place laundry products on top of dryer at any
time. They can damage the finish or controls.
Care and Cleaning
WARNING
To reduce risk of fire or serious injury to persons or property,
comply with the basic warnings listed in the Important Safety
Instructions and those listed below.
• Before cleaning the dryer interior, unplug the electrical power
cord to avoid electrical shock hazards.
• Do not use any type spray cleanser when cleaning the dryer
interior. Hazardous fumes or electrical shock could occur.
INSIDE
• Clean the lint filter after every load. Lint build-up on the filter
restricts air flow, which causes longer drying times. The filter
is located at the bottom of the door opening. Remove by
pulling straight up. Remove the lint and replace the filter.
• Occasionally a waxy build-up may form on the lint filter and/
or moisture sensing bars from using dryer-added fabric
softener sheets. To remove this build-up, wash them with
warm, soapy water. Dry the filter thoroughly and replace. Do
not operate the dryer without the lint filter in place.
• If the dryer drum becomes stained from noncolorfast fabrics,
clean the drum with a damp cloth and a mild liquid house-
hold cleanser. Remove cleanser residue before drying the
next load.
• See next page for more information regarding cleaning of the
condenser assembly.
OUTSIDE
• Clean the cabinet with mild soap and water. Never use
harsh, gritty or abrasive cleansers.
• Remove debris and lint from the front of the condenser door
with a vacuum cleaner.
• Remove glue residue from tape or labels with a mixture of
warm water and mild detergent. Or, touch residue with the
sticky side of the tape or label.
• Before moving the dryer, place a strip of cardboard or thin
fiberboard under the front leveling legs to prevent damage
to the floor.
13