Bosch HBC34D.54. Gebrauchsanweisung - Seite 18
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Backofen Bosch HBC34D.54. herunter. Bosch HBC34D.54. 32 Seiten. Combination steam oven
Auch für Bosch HBC34D.54.: Gebrauchsanweisung (32 seiten), Gebrauchsanweisung (32 seiten)
Seite drucken
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
:
Risk of injury!
The hinges of the appliance door may snap shut with great
force. Always open the hinge locking lever fully when removing
the appliance door and close it fully after refitting. Do not reach
into the hinge.
:
Risk of injury!
If the appliance door has only been unhinged on one side, do
not reach into the hinge. The hinge can snap back with great
force. Call the aftersales service.
Removing the appliance door
Open the appliance door fully.
1.
Fold out the locking levers on the left and right fully (figure A).
2.
The hinges are secured and cannot snap closed.
Close the appliance door until you feel some resistance.
3.
With both hands, grip the door on the left and right-hand side,
4.
close the door a little more and pull it out (Fig. B).
$
Fitting the appliance door
Refit the appliance door after cleaning.
Insert the hinges in the left and right-hand bracket (figure C).
Insert the hinges in the left and right-hand bracket (figure C).
Insert the hinges in the left and right-hand bracket (figure C).
1.
The notch on both hinges must engage.
Open the appliance door fully.
2.
Close the locking levers on the left and right-hand side fully
Close the locking levers on the left and right-hand side fully
Close the locking levers on the left and right-hand side fully
3.
(figure D).
&
The appliance door is secured and can no longer be
removed.
Close the appliance door.
4.
Cleaning the door panels
To facilitate cleaning, you can remove the door panels from the
appliance door.
:
Risk of injury!
The components inside the appliance door may have sharp
edges. Take care not to cut yourself. Wear protective gloves.
:
Risk of injury!
The appliance must not be used again until the door panels
and appliance door have been correctly fitted.
18
%
'
'
'
Removing the door panel
Note: Before removing, make a note of the orientation in which
the door panel is fitted, so that it is not refitted the wrong way
round.
Unhook the appliance door and lay it on a soft, clean surface
1.
with the front side facing downwards (see section: Removing
and installing the appliance door).
Unscrew the cover at the top left and right of the appliance
2.
door and detach it (figure A).
Lift the door panel and remove it (figure B).
3.
$
Removing the intermediate panel
Before removing, make a note of the position in which the
intermediate panel is fitted, so that you do not refit it the wrong
intermediate panel is fitted, so that you do not refit it the wrong
intermediate panel is fitted, so that you do not refit it the wrong
way round later.
Press the left and right-hand holders outwards.
Press the left and right-hand holders outwards.
Press the left and right-hand holders outwards.
1.
Lift the intermediate panel slightly and take it out.
Lift the intermediate panel slightly and take it out.
Lift the intermediate panel slightly and take it out.
2.
Cleaning
Clean the door panels with glass cleaner and a soft cloth.
Caution!
Do not use any sharp or abrasive medium or a glass scraper.
The glass could be damaged.
Fitting the intermediate panel
Insert the intermediate panel on the left and right into the
1.
supports.
Push the intermediate panel downwards in the retainers.
2.
Fitting the door panel
Slide in the door panel all the way.
1.
Put the cover back in place and screw it in.
2.
Refit the appliance door.
3.
%