Bosch HBC36D7.4 Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Backofen Bosch HBC36D7.4 herunter. Bosch HBC36D7.4 36 Seiten. Combination steam oven
Auch für Bosch HBC36D7.4: Gebrauchsanweisung (36 seiten)
Seite drucken
Accessories
Cooking container, solid, GN
deep
Cooking container, perforated, GN
40 mm deep
Porcelain cooking container, solid, GN
Porcelain cooking container, solid, GN
Grease filter
Wire rack
Roasting set
Cleaning sponge
Descaler
Honeycomb microfibre cloth
Before using the appliance for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
Setting the clock and language
■
Setting the water hardness range
■
Starting the appliance for the first time
■
Cleaning the accessories before use
■
Fitting the grease filter
■
Setting the clock and language
After making the electrical connection, "Set the clock" appears
in the display. Set the clock and the language for the display, if
required.
Set the current time using the rotary selector.
1.
Press the
X
button to switch to "Select language".
2.
Set the required language using the rotary selector.
3.
30 different languages are available.
Press the
0
button.
4.
The time and language are applied. The current time is
displayed.
Setting the water hardness range
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or uncarbonated
mineral water.
The water hardness "medium" is the default setting. Change the
value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
Order no.
HEZ36D153
, 40 mm
Y
HEZ36D153G
,
Y
HEZ36D353P
Z
HEZ36D153P
Y
HEZ36DF
HEZ36DR4
HEZ36DB4
643 254
311 138
460 770
Notes
If your water is very hard, we recommend that you use
■
softened water.
If you use only softened water, you can set your appliance to
■
the "softened" water hardness range.
If you use mineral water, set the water hardness to hard.
■
If you use mineral water, you must only use non-carbonated
■
mineral water (see section "Filling and emptying the water
tank").
You can change the water hardness range in the basic settings
when the appliance is switched off.
If required, press the
%
1.
Press and hold the
button until "Select language" appears in
°
2.
the display.
Press the
X
button until "water hardness" appears.
3.
"2-medium" is highlighted in the display.
Use the temperature selector to set the water hardness.
4.
Water hardness
softened
1-soft
2-medium
3-hard
4very hard
Press and hold the
°
button.
5.
Your setting is saved.
Before first use
Before first use, heat the empty appliance for 20 minutes at
100 °C with the Steam type of heating. Do not open the
appliance door during this time. The appliance is automatically
calibrated (see section: Automatic calibration).
Press the
%
button to switch on the appliance.
1.
The "Hot air" type of heating appears after approx.
4 seconds.
Fill the water tank and insert it (see section: Filling the
2.
water tank).
Before using for the first time, moisten the tank cover seal
with a little water.
Turn the rotary selector until "Steam" appears.
3.
button to switch off the appliance.
-
I
II
III
IV
9