Bdcom S2210PB Hardware-Installationshandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Schalter Bdcom S2210PB herunter. Bdcom S2210PB 19 Seiten.
Seite drucken
3.3.3
Connecting 100M Ethernet TX Ports
The S2210PB switch has 8 10/100Base-TX ports. Each port has one indicator, which
indicates the state of Link/ACT. If the indicator is always on, the port is linked up; if the indicator
flickers, the data is transmitted on the port. The numbering order of the pins in the UTP port is
the same as the console port.
Because 8 10/100Base-TX ports of S2210PB support the MDI/MDIX auto-identification of
the cable, S2210PB can adopt five classes of direct-through/cross network cables when it
connects other Ethernet terminals.
No.
1
Figure 3-7 RJ-45 connector of the console port
Figure 3-6 Connecting Base-T ports and other Ethernet terminal
Table 3- 3 Definition of the pins of the 1000M RJ45 port
Pin name
Sending the normal phase of
the data
S2210PB Hardware Installation Manual
Symbol
TXD1+
Note
Output
- 12 -