Bdcom S2510PB Hardware-Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Schalter Bdcom S2510PB herunter. Bdcom S2510PB 19 Seiten.

3.3.3

Connecting Gigabit Ethernet TX Ports

The S2510PB switch has 8 10/100/1000 Base-TX ports. Each port has one indicator,

which indicates the state of Link/ACT. If the indicator is always on, the port is linked up; if the

indicator flickers, the data is transmitted on the port. The numbering order of the pins in the

UTP port is the same as the console port.

Because 8 10/100/1000 Base-TX ports of S2510PB support the MDI/MDIX

auto-identification of the cable, S2510PB can adopt five classes of direct-through/cross

network cables when it connects other Ethernet terminals.

No.

Figure 3-7 RJ-45 connector of the console port

Figure 3-8 Connecting Base-T ports and other Ethernet terminal

Table 3- 3 Definition of the pins of the 1000M RJ45 port

Pin name

Sending the normal phase of

S2510PB Hardware Installation Manual

Symbol

TXD1+

Note

Output

- 12 -