Electrolux ELAY16DGAV8 Gebrauchsanweisung - Seite 24

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Electrolux ELAY16DGAV8 herunter. Electrolux ELAY16DGAV8 31 Seiten.

Seite drucken
24
www.electrolux.com
Errors
The washing
machine is not
working
E1
Water supply fault
E2
Overflow fault
E3
Drainage fault
E4
Spin cycle fault
Frequently asked questions
What should you do if the washing
machine starts to make noises?
If the garments pile up on one side and
the washing/spinning drum is unbalanced.
You must even out the laundry load and
remember that when spinning starts it is
normal to hear a slight noise.
Press ON/OFF.
Press START/PAUSE.
Make sure that the wash/spin drum has the required amount of
water.
Make sure that the DELAYED START function is not activated.
Make sure that the supply wire is firmly plugged in. Check
whether there is a power cut.
Check the fuse or trip switch in your house.
Turn on the water supply tap.
Make sure the water supply has been cut off (open the water
taps). Make sure that the electrovalve filter is not closed.
Immediately turn off the water supply taps.
Disconnect the washing machine from the electricity supply
source. Call the Authorised Repair Service.
Check to see if there is a problem with the drainage hose.
Check to see if the drainage hose is clogged with fluff. Make
sure that the drainage hose is within the maximum and minimum
height limits. Call the Authorised Repair Service.
Make sure that the washing machine lid is closed.
Check that the laundry load is uniformly distributed.
Make sure that the washing machine is on a level surface.
If this fault occurs when carrying out a direct spin, modify the
laundry load and press the START/PAUSE button twice.
Direct spin refers to the process of spinning only manually
selected by the washing machine user.
What should you do when water is
leaking out?
Make sure that the hose clip is properly
fixed to the drainage hose and if not adjust
it manually to prevent the leakage from
continuing (page 9).