Electrolux EW 1418 1 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Electrolux EW 1418 1 herunter. Electrolux EW 1418 1 30 Seiten. Electrolux washing machine instruction booklet
Seite drucken
Reset/cancellation of the programme
If the programme selector dial is turned to Off position,
three blinking dashes are displayed.
Now you can select a new programme.
(If the programme selector dial has not been turned to
Off position at the end of the previous washing cycle,
when you press the ON/OFF button to switch the
machine on, the display will show a blinking zero.)
Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of fabric.
After the programme has started, the time remaining is
updated every minute.
Delayed start
The selected delay (23 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour and, when remain
the last 2 hours, each 30 min.
I I n n c c o o r r r r e e c c t t o o p p t t i i o o n n s s e e l l e e c c t t i i o o n n
f an option which is not compatible with the set wash
I
programme is selected, the message Err is displayed for
2 seconds.
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
"Something not working").
End of programme
When the programme has finished a flashing zero is
displayed. The door can be opened when the "End"
pilot light has gone out and if the Rinse hold
Night Cycle option has not been selected.
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
8
or