Electrolux EW 1477 F Benutzerhandbuch - Seite 32

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine Electrolux EW 1477 F herunter. Electrolux EW 1477 F 44 Seiten. Electrolux washing machines
Auch für Electrolux EW 1477 F: Gebrauchsanweisung (25 seiten)

Electrolux EW 1477 F Benutzerhandbuch

Installation and connection instructions

Technical data /dimensions

Height adjustability
Load (depending on programme) max. 5kg
Area of use
Drum spin speed
Water pressure

Safety information concerning installation

• Do not tip the washing machine onto its front nor
onto its right side (looking at it front-on). Electrical
components could become wet as a result.
• Check the washing machine for damages that
may have occurred during transit. Under no cir-
cumstances can you connect a damaged appli-
ance to the mains. In the event of damage to the
appliance contact your supplier.
• Ensure that all parts of the transportation lock
have been removed and that the appliance's
splash guard has been fixed; see "Removing the
transportation lock". Otherwise damage my be
sustained by the appliance or adjoining units dur-
ing spinning.
• Always insert the power plug into shock-proof
power points that have been installed according
to regulations.
• In the case of hard-wiring: Hard-wiring to the
mains may only be carried out by an authorised
technician.
• Prior to using the appliance ensure that the mains
voltage and current rating at the site of installation
match the nominal voltage and current rating
stated on the rating plate. The required fuse pro-
tection is also to be found on the rating plate.
• If work needs to be carried out on the water
installations so that the washing machine can be
properly connected to the water supply, this work
must be carried out by an authorised installation
technician.
32
about +10/-6mm
Household
see Rating Plate
1-10bar
2
(=10–100N/cm
=0.1–1.0MPa)
• If work needs to be carried out on the electricity
• The mains supply line may only be replaced by
network so that the washing machine can be
properly connected to the electricity supply, this
work must be carried out by an authorised electri-
cian.
Customer Service or by an authorised technician.
(Measurements in mm)