Bosch HBG579BB6B Benutzerhandbuch und Installationsanleitung - Seite 19
Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Backofen Bosch HBG579BB6B herunter. Bosch HBG579BB6B 40 Seiten.
Seite drucken
14.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Download the Home Connect app.
1.
14.2 Home Connect Settings
You can adjust the settings and network settings for Home Connect in the basic settings for your appliance.
The settings shown in the display depend on whether Home Connect is set up and whether the appliance is connec-
ted to the Wi-Fi.
Basic setting
Setting with the as-
sistant
Appliance info
Wi-Fi
Disconnecting the
network
Connect to app
Connect to other app
Software update
14.3 Operating the appliance with the
Home Connect app
When the Remote start function is activated, you can
use the Home Connect app to remotely configure the
appliance's settings and start it.
Note: Some operating modes can only be started on
the oven.
Requirements
¡ The appliance is switched on.
¡ The appliance is connected to the Wi-Fi and to the
Home Connect app.
To activate the remote start, press and hold
1.
a If the remote start is activated, the display shows .
Implement a setting in the Home Connect app and
2.
send it to the appliance.
The appliance deactivates the remote start in the
following cases:
– If you open the oven door within 15 minutes after
activation.
Possible settings
-
-
On
Off
-
-
-
Open the Home Connect app and scan the follow-
2.
ing QR code.
Follow the instructions in the Home Connect app.
3.
Explanation
An assistant guides you through the set-up and settings of
Home Connect.
If you select the appliance information, the display shows in-
formation about the network or the appliance.
If Wi-Fi is activated, you can use Home Connect.
In networked standby mode, the appliance requires max. 2 W.
If you disconnect from the network, the network information is
retained.
After switching on the appliance, it may take a few seconds
until the appliance has established the connection to the net-
work.
The setting starts the connection between the Home Connect
app and the appliance.
The setting is only displayed if an update is available.
– If you open the oven door within 15 minutes after
the operation ends.
– 24 hours after activating the remote start.
Note: The remote start is automatically activated
when you start the oven mode on the appliance.
You can change the settings via the Home Connect
app or start a new programme.
14.4 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
Home Connect en
19