Electrolux EW 805 F Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Electrolux EW 805 F herunter. Electrolux EW 805 F 27 Seiten. Washing machine
Auch für Electrolux EW 805 F: Installations- und Betriebsanleitung (20 seiten), Installations- und Betriebsanleitung (20 seiten)

Seite drucken

START / PAUSE button

After selecting the required programme, by the

programme selector (see section 8), press this

button to start the machine; the corresponding light

stops flashing and will keep lighting until the

programme finishes.

To interrupt the running programme, depress

START / PAUSE button: the corresponding

light starts to flash.

To restart the programme from the point at which it

was interrupted, press

again.

SPIN REDUCTION Button

This option allows the reduction of the final and the

intermediate spin speed or to select the

HOLD option.

Press this button so many times as it was necesary

until the relevant light turns on corresponding to the

whished option.

The speeds on the lights refer to cotton programmes

in both models (EWF805 and EWF1005)

• For the model EWF1005:

- The light 1000r.p.m. corresponds to 900 r.p.m.

in synthetics and wool programmes and in the

delicates programmes corresponding to 700

r.p.m.

- The lights for 700 r.p.m. and 500r.p.m. are

common for all programmes making reference to

the same speed.

• For the model EWF805:

- The light 800r.p.m. corresponds to 700 r.p.m. in

the delicates programmes.

- The lights for 700 r.p.m. and 500r.p.m. are

common for all programmes making reference to

the same speed.

NOTE: In both models, by default, the light of spin

speed will turns on according to the selected

programme

RINSE HOLD: by selecting this option, the

water of the last rinse is not drained, in order to

prevent the fabrics from wrinkling. When the

programme hasfinished,

START / PAUSE button

RINSE

END light will iluminate.

7. Programme progress display

During programme cycle the light

CYCLE EXECUTION will remain lit.

The light

END will illuminate to indicate that the

selected programme has finished.

The light

END flashes in the event of operating

problems:

• 4 flashes: door open.

• 2 flashes: problem with water draining.

• 1 flash: problem with water supply.

For more information see paragraph "Something not

working?" at the end of this booklet.