Alemlube 339000 Technisches Handbuch für den Eigentümer - Seite 2

Blättern Sie online oder laden Sie pdf Technisches Handbuch für den Eigentümer für Water Pump Alemlube 339000 herunter. Alemlube 339000 7 Seiten. 240v diesel transfer pump

Seite drucken

Safety Warning and Precautions

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible

conditions or situations that could occur. It must be understood by the operator that common sense

and caution are factors that cannot be built into this product, but must be supplied by the operator.

1. Keep the work area clean and dry. Damp or wet work areas can result in injury.

2. Keep children away from work area. Do not allow children to handle this product.

3. Use the right tool for the job. Do not attempt to force small equipment to do the work of larger industrial equipment.

There are certain applications for which this equipment was designed. It will do the job better and more safely

at the capacity for which it was intended. Do not modify this equipment, and do not use this equipment

for a purpose for which it was not intended.

4. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its

intended function. Check for damaged parts and any other conditions that may affect the operation of this product.

Replace damaged or worn parts immediately.

5. Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etc.

6. DO NOT use the equipment when tired or under the influence of drugs, alcohol, or medication.

A moment of inattention while operating this equipment may result in serious personal injury.

1. Read the following precautions and instructions before you begin assembly or using.

2. Failure to comply with these instructions could result in personal injury or property damage.

Keep these instructions in a convenient location for future reference.

Important Note:

The guarantee will be void if the pump has been altered in any way.

Main Components and Accessories

The main parts of the 240V Diesel Transfer Pump are:

1. Electric engine

2. Pump

3. Suction and delivery point

4. Filter

Usage Field

The 240V Diesel Transfer Pump is not suitable for submerged usage (with the electric engine under liquid).

It is used just for suction, convey or distribution of low viscosity diesel (<5 cSt) with a flammability point non inferior

to 60°C. Liquids must be not corrosive, cleaned or contain in suspension very low percentage (2.3% max.) of solid

particles in order not to wear the internal surfaces of the pump.

Do not use the pump in corrosive or explosive environments (dusts and flammable vapours or other gases)

as the engine is not flameproof. To avoid damages it must work in environments with the temperature not lower than

5°C and not higher than 40°C / 90% maximum humidity. The electric engine of the pump is designed for a continuous

rating working (the by-pass working is allowed just for a few minutes) during which there are not any generated

electromagnetic disturbances.

WARNING:

Do not use the pump with solvents, fuels, flammable or dense liquids, corrosive fluids,

water or alimentary liquids.

NSW/ACT

QLD/PNG

TEL: (02) 9677 1555

TEL: (07) 3204 9166

FAX: (02) 9675 1155

FAX: (07) 3204 1224

OWNER'S TECHNICAL MANUAL

240V Diesel Transfer Pump

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

www.alemlube.co.nz

339000

TEL: (09) 447 1007

FAX: (09) 447 1008