Carlin 102CRD Gebrauchsanweisung - Seite 20

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Brenner Carlin 102CRD herunter. Carlin 102CRD 20 Seiten. Advanced oil burners 0.5 to 4.5 gph

Seite drucken

Model 99FRD, 102CRD & EZ-66 Oil Burners — Instruction Manual

The burner must be cleaned, tested and

adjusted annually by a qualified oil burner

service technician.

Should overheating occur:

(1) shut off the oil supply to the burner.

(2) DO NOT shut off the control switch to the

circulator or blower.

(3) contact your oil dealer or service techni-

cian and the fire department (if needed).

– 20 –

99FRD, EZ-66 and 102CRD

Oil Burner

User care and maintenance

Refer only to the information on this

page, intended for your use. The

remainder of this manual is intended

only for your service technician.

Failure to comply could result in

severe personal injury, death or

substantial property damage.

For other than routine maintenance, contact

a qualified service company. Perform the

following as needed.

• Keep the area around the burner clear

and free from combustible vapors and

liquids.

• Do not obstruct the flow of combustion

and ventilating air.

• Most motors currently used on residential

type burners use permanently-lubricated

bearings, and do not require field lubri-

cation. Read the label on the motor to

determine oiling needs, if any. Do not

over-lubricate. This can cause as much

trouble as not lubricating at all.

Never attempt to use gasoline as

a fuel for this burner, as it is more

combustible and could result in a

serious explosion. Never attempt to

burn refuse or use any fuel other

than # 1 or # 2 heating oil (ASTM

D396).

MN99102 042015