Draytek VigorPlug 200AV Schnellstart-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Adapter Draytek VigorPlug 200AV herunter. Draytek VigorPlug 200AV 4 Seiten. 200m powerline ethernet adapter
Auch für Draytek VigorPlug 200AV: Spezifikationen (2 seiten)
Seite drucken
Note 2: Be sure unplug the Ethernet cable before press the Reset button to avoid
damage to your device.
Warning
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Important Safety Instructions
The following pre-cautions should be taken when using this product:
This product is intended for connection to the AC power line.
The following pre-cautions should be taken when using this product:
Please read all instructions before installing and operating this product.
Please follow all warnings and instructions marked on the product.
Do not operate this product near water.
This product should never be place near or over radiator, or heat register.
This product relies on a building's electrical installation for short-circuit (over current) protection.
Ensure that a fuse or circuit breaker is used on the phase conductors (all current-carrying conductors).
Do not allow anything to reset on the product interconnect cords.
Do not locate this product where people may walk on the cords.
The power cord should be plugged directly into a specification AC wall outlet.
Only a qualified technician should service this product. Opening or removing covers may result in
exposure to dangerous voltage points or other risk.
Unplug this product from the wall outlet and refer the product to qualified service personal for the
following conditions:
When the interconnect cords are damaged or frayed.
If liquid has been spilled onto the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions have followed.
If the product exhibits a distinct change in performance.
.