Draytek VigorTalk ATA Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Adapter Draytek VigorTalk ATA herunter. Draytek VigorTalk ATA 17 Seiten.

2.1 Connect VigorTalk to Your Phone and Network

If the router act as an DHCP server, to use the Web GUI, you only need to

connect both the PC and VigorTalk to the router. They should be assigned IP

addresses at the same subnet by the router.

1 Use a standard RJ-45(Ethernet) cable to connect the LAN port of

VigorTalk and the router.

2 Use a standard RJ-11 (telephone) cable to connect the Phone port of

VigorTalk and the touch tone telephone.

Note: Do not connect RJ-11 (telephone) cable to the wall jack

3 Connect the power adapter (included) to the receptor of VigorTalk and

plug the other end of the power adapter to a wall outlet to power on the

unit.

4 Via the phone key pad, press "***#" to enter the VigorTalk IVR. You will

hear the welcome message.

5 Press "41#" to "Check the IP Address". You will hear the IP address of

VigorTalk. Write down and then hang up.

For further detail of IVR, please refer to the section 2.3.

6 Open your Web browser and enter http://(VigorTalk IP Address that you

heard). Enter the default password "vigortalk" and leave the

administrator filed blank in the window.

7 You may start configure VigorTalk via WebUI now.

For more detail of Web UI, please refer to the section 2.2.

VigorTalk ATA