Draytek Vigor2832 Series Schnellstart-Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Modem Draytek Vigor2832 Series herunter. Draytek Vigor2832 Series 17 Seiten. Adsl2/2 + security firewall
Seite drucken
3
.
P
a
n
e
l
E
3
.
P
a
n
e
l
E
LED
ACT
(Activity)
USB1~USB2 /
USB
WLAN
WAN2
DSL
VPN
QoS
WCF
DoS
LED on Connector
LAN
WAN2
x
p
l
a
n
a
t
i
o
n
x
p
l
a
n
a
t
i
o
n
Status
Explanation
Blinking
The router is powered on and running normally.
Off
The router is powered off.
On
A USB device is connected and active.
Blinking
The data is transmitting.
On
Wireless access point is ready.
Blinking
Ethernet packets are transmitting over wireless LAN.
Off
The WLAN function is inactive.
On
The WAN2 connection is ready.
Blinking
It will blink while transmitting data.
On
The router is ready to access Internet through DSL link.
Blinking
Slowly: The DSL connection is ready.
Quickly: The connection is training.
On
VPN tunnel is up and down.
Off
VPN services are disabled.
Blinking
Traffic is passing through VPN tunnel.
On
The QoS function is active.
On
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
On
The DoS/DDoS function is active.
Blinking
It will blink while detecting an attack.
Left LED
On
(Green)
Off
Blinking
Right LED
On
(Green)
Off
Left LED
On
(Green)
Off
Blinking
Right LED
On
(Green)
Off
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
3