ADVANCED HOME CARE 6500-BHD Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Toiletten ADVANCED HOME CARE 6500-BHD herunter. ADVANCED HOME CARE 6500-BHD 3 Seiten.

Instructions for the Drop Arm Commode 6599 and XW Commode 6500-

BHD

Installing/Removing the Seat, Lid and Pail

NOTE: When installing the seat onto the frame, make sure that the

seat is evenly spaced between the side frames to ensure proper

stability. DO NOT use excessive force when installing the seat and lid.

When installing the seat and lid, install the seat first and then the lid.

1. Align the grooves on the underside of the seat with the commode

frame.

6500BHD

2. Push down firmly until the seat snaps into place.

3. Put the pail into place.

Removing: NOTE: When removing the seat or lid, remove the pail, lid

and then the seat. NOTE: DO NOT use excessive force when removing

the seat and lid.

1. Remove the pail.

2. Grasp the back corner of the lid and lift up firmly.

3. Grasp the back corner of the seat and lift up firmly.

Installing/Removing the Back Rail (if applicable) NOTE: This

procedure applies to Models 6497 and 6500‐BHD ONLY.

6599

Installing

1. Depress the snap buttons on each side of the back frame.

2. Put the back rail into the frame. Adjust the back frame until the snap buttons protrude out

of the holes on each side of the frame.

NOTE: An audible "click" will be heard when each snap button is properly engaged into the

frame holes.

Removing

1. Depress the snap buttons on each side of the back frame.

2. Pull the back frame out of the frame.

Adjusting the Height of the Commode

1. Depress the snap button in the frame and adjust the leg

extension to the appropriate height adjustment hole.

NOTE: An audible "click" will be heard.

NOTE: Make sure the snap buttons are fully engaged into the

height adjustment holes before use.

2. Repeat STEP 1 to adjust the other leg extensions.