Alen BreatheSmart FIT50 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Luftreiniger Alen BreatheSmart FIT50 herunter. Alen BreatheSmart FIT50 11 Seiten. Hepa air purifier
Auch für Alen BreatheSmart FIT50: Benutzerhandbuch (12 seiten)
Seite drucken
4. Take the new filter out of
the plastic bag and insert it
into the air cleaner with the
pull strings facing outward.
5. Insert the top tabs of the
front cover first and then
the lower part of the cover
will snap into place.
WARNING! RISK OF ELECTRIC SHOCK - These servicing instructions are for use by
qualified personnel only. To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you are qualified to do so.
How To Clean The SmartSensor
The SmartSensor uses an infrared light to detect airborne particles. After prolonged periods of
use, dust can accumulate on the lens and affect the sensitivity of the sensor. If this occurs,
your unit will run on the highest speeds when set in Automatic mode and will not come down
to the lower speeds even after cleaning the air. To clean the sensor lens, first turn your unit off.
Wet the end of a cotton swab with water and wipe the lens with it. Dry the lens with the other
end of the cotton swab. For best performance, clean the SmartSensor lens each time you
replace your filter.
2. After pulling out, lift the cover
away from the unit.
www.alen.com 1-800-630-2396
3. Remove the used filter
by pulling out on the pull
strings. Place the used
filter in a plastic bag to
prevent dust from
re-entering the air.
7