ANCEL M3 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Arbeitslicht ANCEL M3 herunter. ANCEL M3 4 Seiten.

Step 2: Brightness setting

By long pressing the +/- button, you can dim continuously in each lighting mode to

choose the right brightness you need.

Step 3: USB charging port

Plug the USB charging cable into the Type-C port to charge your device. The charging

power is DC 5V/2A. The full charging time is 3 hours.

Step 4: USB output port

You can use it as a power bank. The port is USB output and the output power is

DC 5V/2A.

Step 5: Installation

1.Strong magnetic installation, there is a strong magnet at the bottom of the lamp,

which can be magnetically attracted to the surface of metal-iron materials.

2.Carabiner installation, the screw at the bottom of the lamp can be turned clockwise

to install the carabiner, and the carabiner can be installed with a hook.

3.Tripod installation, the screw at the bottom of the lamp can be turned clockwise to

install the tripod.

Attention

1. Do not stare at the LED light directly, it may hurt your eyes.

2. Please use the USB charging cable to charge the lamp before use. The input

power is DC 5V/2A, and it takes about 3 hours to fully charge. When charging, the

blue charging indicator flashes, and when fully charged, 4 blue indicator lights are

on at the same time, indicating 100% power, 1 blue indicator represents 25% power

and the power can be judged according to the number of bright blue indicators

How many.

3. Charge your light at least every 3 months to maintain the battery status if not in

use for long time.