Advanced Illumination DCS-800E Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller Advanced Illumination DCS-800E herunter. Advanced Illumination DCS-800E 12 Seiten. Quad controller
Seite druckenModes:
Sequenced
Sequenced mode allows the user to synchronize each channel flash with a camera exposure
to create a multi-dimensional acquisition. Channel recipes can be configured by the user,
depending on the application needs.
A Sequence is made up of a series of Events. Events can be thought of as "recipes" that contain
all the channel settings (pulse delay, current, pulse width, etc.) associated with the receiving
trigger.
With the DCS-400E, each Event can include anywhere from 1-4 channels (DCS-800E includes 1-8
channels), with their respective settings (pulse delay, current, pulse width). For example, to set
up a quadrant imaging application, the user should create x4 Events, one for each quadrant. An
Event can contain any number of channels.
The example Sequence in Figure 3 shows Event 2 thru 5 in its series. This setup will require x4
triggers from the camera to complete the Sequence.
Figure 3 - Defining a Sequence using four Events with the DCS-400E .
Figure 4 - Visual representation of each trigger initiating the next Event in the Sequence.
Page 5