Anchor Explorer Pro Benutzerhandbuch
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Anchor Explorer Pro herunter. Anchor Explorer Pro 13 Seiten. Anchor audio portable sound system
Auch für Anchor Explorer Pro: Benutzerhandbuch (8 seiten), Benutzerhandbuch (4 seiten), Benutzerhandbuch (8 seiten)
Seite drucken
- 1. Troubleshooting Guide
- 2. Important Safeguards
- 3. Specifications
- 4. Getting Started
- 5. Wireless Microphone Operation
- 6. Wireless Operation
- 7. Battery Operation
- 8. Battery Level Indicator
- 9. Charging Batteries
- 10. Replacing Transmitter Battery
- 11. General Operation
- 12. Line Inputs
- 13. Line Outputs
- 14. Speaker Output
Having trouble with the sound system?
Condition
No sound (power LED not lit):
Charge indicator doesn't light:
No sound (power LED lights):
Shortened battery life:
Distorted sound:
Excessive hum or noise:
Having trouble with the wireless system?
Condition
No sound (RX ON indicator lights):
No sound (RX ON indicator off):
TROUBLESHOOTING GUIDE
Possible Solution
• turn POWER switch ON
• charge battery or plug in AC cord
• leave plugged in for 48 hours to repair battery
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using
external speaker output
• charge battery fully; if battery life continues to
deteriorate, contact Anchor customer service
• lower system volume control
• use shielded cables
• use balanced microphone
Possible Solution
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into bodypack
transmitter
• pull VOLUME knob
• turn Explorer POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
ANCHOR Audio, Inc. (310) 784-2300
100-0143-000 / Revision 1 - 03/04
(Wireless Models Only)