Advanced Industrial Computer XC-34D1-0-R Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Advanced Industrial Computer XC-34D1-0-R herunter. Advanced Industrial Computer XC-34D1-0-R 8 Seiten. 3-4 sas/sata ii hdd canister deluxe version

Seite drucken

Safety Precautions

Before getting started, please read the following important cautions:

All cautions and warnings on the equipment or in the manuals should be noted.

Most electronic components are sensitive to electrical static discharge, therefore, be

sure to ground yourself at all times when installing the internal components. Use a

grounding wrist strap and place all electronic components in static-shielded devices.

Grounding wrist straps can be purchased in any electronic supply store.

Do not open the system's top cover. If opening the cover for maintenance is a must,

only a trained technician should do so. Integrated circuits on computer boards are

sensitive to static electricity. Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few seconds. This will help to

discharge any static electricity on your body.

Place this equipment on a reliable surface when install. A drop or fall could cause

injury.

Please keep this equipment from away humidity.

Do not leave this equipment in an environment unconditioned, out of operation or

storage temperature range may damage the equipment.

Never pour any liquid into ventilation openings This could cause fire or electrical

shock.

Make sure the voltage of the power source is within the specification on the label

when connecting the equipment to the power outlet. The current load and output

power of loads shall be within the specification.

This equipment must be connected to reliable grounding before using.

Place the power cord out of the way of foot traffic. Do not place anything over the

power cord. The power cord must be rated for the product, voltage and current

marked on the product's electrical ratings label. The voltage and current rating of the

cord should be greater than the voltage and current rating marked on the product.

If the equipment is not used for a long time, disconnect the equipment from mains to

avoid being damaged by transient over-voltage.

Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

If one of the following situations arise, the equipment should be checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or will not work according to its user's

manual.

The equipment has been dropped and/or damaged.

The equipment has obvious signs of breakage.

Please disconnect this equipment from the AC outlet before cleaning. Do not

use liquid or detergent for cleaning. The use of a moisture sheet or cloth is

recommended for cleaning.