Dream Catcher ME3000 Analog Electronics Lab 6 Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Dream Catcher ME3000 Analog Electronics Lab 6 herunter. Dream Catcher ME3000 Analog Electronics Lab 6 19 Seiten. Rf class a tuned amplifiers

Seite drucken

______________________________________________________________________

Figure B-10 – Soft Front Panel of the Delay Control and Trigger Point

13. You may click

14. The oscilloscope offers three types of horizontal mode functions, which are Main Mode, Roll

Mode, and XY Mode. You may select the horizontal mode by clicking the drop-down list

under Mode.

Measurement and Cursor Controls

1. The Measurements & Cursors button is located on the toolbar of the soft front panel.

2. Click

This will display the window as shown below:

Figure B-11 – Soft Front Panel of the Measurement and Cursor Controls

3. The oscilloscope provides three types of settings for marker property, which are Auto,

Manual, and Off.

4. Auto marker automatically places the cursors on the graph based on the selected

measurements.

5. Manual marker allows the cursors to be placed manually on the graph for customized

measurements. This will enable the Cursors panel.

6. Off will disable the graph markers from the graph display.

7. If the Manual marker is selected, the Cursors control will be enabled. This is shown in Figure

ME3000 Analog Electronics

to increase or decrease the delay time.

to activate the automated measurement and cursor system.

http://dreamcatcher.asia/cw

Lab 6 - 18/19