Anchor ETI 30’CLASSIC FRAME TENTS Montageanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Zelt Anchor ETI 30’CLASSIC FRAME TENTS herunter. Anchor ETI 30’CLASSIC FRAME TENTS 8 Seiten.

Seite drucken

30'

CLASSIC FRAME TENTS

RAFTER / PEAK ASSEMBLY

If needed, position a tent jack near the center

of the tent to support the 6-Way Crown Fitting

and Rafters while assembling. You may also

need a ladder when connecting the rafters to

the crown fitting.

Starting on either the left or right 30-foot

side, slide a (21'8-1/4") Double Tube

Corner Rafter into the rafter connector

opening of each of the Corner Fittings.

Assure that the snap buttons engage.

Using a ladder if necessary, attach the

6-Way Crown Fitting to the other end of

each of the Corner Rafters until the snap

buttons engage. If needed, temporarily

supply support the Crown Fitting using

the tent jack. (Note: The corner connector

openings of the 6-Way Crown Fitting that

connect to the Corner Rafters will be the

shorter tube openings.) Be sure the 90°

connector opening of the 6-Way Crown

Fitting is pointing towards the opposite

Crown Fitting.

One at a time, insert a (16'1/4") Mid-Rafter

to a Mid-Leg/Rafter Fitting until the snap

button engages and connect the other

end to the 6-Way Crown Fitting until the

snap button engages. Repeat for all three

Mid-Rafters. The perimeter of the frame is

designed to flex sufficiently to make this

step easy.

Repeat steps 4 & 5 for the opposite side.

Connect the two 6-Way Crown Fittings in

the middle with a (9'4") Top Bar. Be sure

to insert the bar until the snap buttons

engage. You now have a completed 30' x

40' peak assembly.

For structures longer than 40', connect the end 9'4" Top Bars to a Top Extension Fitting. Connect additional

9'4" Top Bars between the Top Extension Fittings and the opposite end 6-Way Crown Fitting. One at a time,

insert a (16'1/4") Mid-Rafter to a Mid-Leg/Rafter Fitting until the snap button engages and connect the

other end to the Top Extension Fitting(s) until the snap button engages.

ASSEMBLY INSTRUCTIONS