Anchor AnchorMAN Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Intercom System Anchor AnchorMAN herunter. Anchor AnchorMAN 4 Seiten. Wireless intercom system
Auch für Anchor AnchorMAN: Benutzerhandbuch (6 seiten)

Seite drucken

a mESSagE FrOm ThE OWNEr

Thank you for choosing an Anchor Audio wireless intercom system. Our products incorporate state-of-the-art design and the fin-

est quality of materials and workmanship. We're proud of our products and appreciate the confidence which you have shown

by selecting an Anchor system.

I hope you'll take a few minutes to review this manual. We've incorporated several unique features into our products, and your

knowledge of how to use them will enhance the performance and your enjoyment of the system.

Janet Jacobs, President

on behalf of all Anchor Employees

gETTiNg STarTEd

Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product is care-

fully inspected at the factory and packed in specially designed boxes for safe transport.

Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original box and

wait for inspection by the carrier's claim agent. Notify your dealer of the pending freight claim.

NOTE: all damage claims must be made with freight carrier!

rETurNiNg SySTEmS FOr SErviCE Or rEPair

For service or repair, please contact the dealer where system was purchased or Anchor Audio Customer Service (800/262-4671

or 310/784-2300) to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include RA number and

be shipped prepaid. C.O.D. shipments will be refused and returned at your expense.

Customers outside the USA must contact dealer where system was purchased for service or repair instructions.

imPOrTaNT: Save shipping box & packing materials, they're specially designed to ship

WarraNTy rEgiSTraTiON & iNFOrmaTiON

Please go to our website, www.anchoraudio.com, and select "Warranty Registration". Completing this online registration form

will activate your limited two-year warranty.

Warranty is void if the belt pack case or headset has been opened, screws have been removed or there is evidence of tampering.

Waste electrical and electronic products must not be disposed of with household

waste. Please recycle where facilities exist. Check with your Local Authority or

Retailer for recycling advice.

your unit!

hEadSET OPEraTiON

AnchorMAN wireless intercom systems use both single and dual-earpiece, noise

cancelling headsets featuring 4-pin XLR connectors and dynamic microphones.

1. Put on headset and adjust for a firm, comfortable fit

2. Connect headset cable to belt pack jack using the XLR

connector

3. Position boom microphone close to mouth

4. Headset Volume Control buttons are on belt pack adjust

volume by pushing "+" or "–" repeatedly

For videos on how to setup & use your anchormaN:

www.anchoraudio.com

miCrOPhONE SENSiTiviTy

Use the Microphone +/– buttons to adjust voice detection sensitivity levels.

mOrE mic

Press + for more voice detection sensitivity and – for less. The highest + setting

Sensitivity

will pick up your voice even at a whisper.

The most sensitive settings should be used in very quiet environments with lit-

tle or no back ground noise. Experiment with the Microphone Sensitivity level

to ensure voice detection picks up the beginning and end of each sentence.

Remember, what you hear in your headset is what other members of the net-

work will hear.

lESS mic Sensitivity

CauTiON: Setting voice detection to an overly sensitive level can cause

ambient background noise to trigger transmission, disturbing all

members of the network.

uSEr id SETTiNgS

Each AnchorMAN belt pack is preset at the factory with an individual USER ID (1 – 4) . If more than four users are required in a

single group, use DIP switches 1 & 2 to assign belt packs to a USER ID. In groups of five or more, users will be required to share

USER ID's. Each belt pack will be able to monitor all communications within the group, but only one user with a shared USER

ID will be able to transmit at a time.

When you receive your AnchorMAN 4-user set each belt

pack is labeled with 1, 2, 3 or 4 , this number corresponds

to the USER ID assigned to that unit at the factory. Ad-

ditional labels have been included (numbers 1 – 4) to be

used when changing USER ID's. Use the table at right

when changing USER ID settings.

raiSE

headset volume

lOWEr headset volume

bP-900 Frequencies (mhz)

group a group b group C group d

user 1

945

945.4

945.8

946.2

user 2

946.6

947

947.4

947.8

user 3

948.2

948.6

949

949.4

user 4

949.8

950.2

950.6

951