Anchor AF-1500 Handbuch zur Schnelleinrichtung - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Water Filtration Systems Anchor AF-1500 herunter. Anchor AF-1500 11 Seiten.
Seite drucken
STEPS
1. Choose Filter Location
-
The first step of water filter installation is to choose a location that
is easily accessible - the unit will need to be accessed regularly to
change the filter cartridges regularly, so be sure no obstacles
interfere with installation.
-
Protect the system against extreme weather - operating
temperature range is 40° -100° F.
-
Select a position near the main water shut-off valve, before the line
splits or meets the hot water heater.
-
If you have a water softener installed, the whole house filtration
system should be installed after that.
-
Keep in mind that a filter mounting bracket will be secured to the
home structure, such as a wall. Make sure the wall can support
weight of the system when full of water.
-
Ensure the unit is at least 3
inches above ground. This
will make it easy to open
housings
replacement
2. Cut the Pipe
-
Turn off the main water supply.
-
Measure length of the unit and mark the pipe at exact locations
where the filter will be placed. Leave space for shut-off valves on
either sides also if that is to be installed.
-
Use a tube cutter to make cut at the marks and remove the
section. Place a bucket below the pipe at the location for any water
remaining in the water line.
for
filter
6