Formax FD 8400HS Wartungshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Wartungshandbuch für Aktenvernichter Formax FD 8400HS herunter. Formax FD 8400HS 14 Seiten. High security shredder cross-cut
Auch für Formax FD 8400HS: Benutzerhandbuch (2 seiten)
Seite drucken
Specifications
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power supply:
Set-up Guidelines
1. Install the shredder on a level surface, away from heat sources and direct sunlight.
2. Insert plug into wall outlet with the appropriate voltage, 110V. If the outlet is shared with another electronic
device, the total current should not exceed 30A (at 110V).
Control Panel Functions
Control Panel
FD 8400HS
Cross Cut
1/32" x 3/16" (Level 6)
6 to 7 (NO Staples or Paper Clips)
23 feet per minute
10.25"
20" W x 20" D x 34" H
20 gal.
176 lbs.
110V, 50/60Hz
AUTO: The shredder will operate in Auto mode after pressing the Start button.
MANUAL: By pressing the Start button a second time, the shredder can be
operated in Manual mode. The shredder will begin running, and will stop
automatically after 3 minutes.
STOP: Pressing this button stops operation.
REV: The shredder will automatically reverse cutter direction if too many
sheets of paper are inserted at one time.
FULL: The shredder automatically stops when the waste bin is full.
OPEN: The shredder will stop automatically if the cabinet door is open.
Simply close the door and press Start to resume operation.
LOAD INDICATOR: This multi-colored indicator shows the load during
shredding.
1