Anco BL9710A-SA Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender Anco BL9710A-SA herunter. Anco BL9710A-SA 13 Seiten.

4. Install the jar onto the jar base. Make sure that the jar is installed correctly in position.

5. Connect the appliance into a mains power outlet socket.

6. Turn the "Speed knob" to "ON" position, and the indicator lights on the four buttons will

light up. Press the "Smoothie" button, and its corresponding indicator lights up solidly while

the indicators of the other three buttons will extinguish, then the appliance starts to work.

Alternatively, you can turn the "Speed knob" to the speed settings ranged between "Min" and

"Max" at the "Speed knob" to make smoothie at your desired speed.

NOTE: The speed cannot be adjusted by the "Speed knob" when the appliance is running

under the "Smoothie" mode.

NOTE: During the blending process, if you want to stop the blender, press "Smoothie" button

again or turn the "Speed knob" to "OFF" position.

7. During operation, you can remove the measuring cup on the lid and add ingredients into the

jar through the center opening on jar lid cover, and then place the measuring cup.

NOTE: Do not remove the jar from the motor unit during blending. If it is necessary to remove

the jar, first turn OFF the appliance and then remove it.

CAUTION: Minimum 30 minutes rest time must be maintained between two continuous

cycles.

10. After finish making the smoothie, the appliance will stop working automatically and the

indicator lights on the four buttons will light up. During operation, you can turn the "Speed

knob" to "OFF" position to stop the appliance when you achieve the desired blending result.

11. Unplug the appliance from mains power and then remove the jar from the motor unit.

Carefully remove the jar cover, then pour and serve.

CAUTION: For electrical safety. The appliance must be unplugged from mains power before

removing the jar.