Ancor PM 13- 2778 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water Pump Ancor PM 13- 2778 herunter. Ancor PM 13- 2778 2 Seiten. Engine cooling pumps

Seite drucken

ENGINE COOLING PUMPS

PM MODEL

Attention : these instructions are addressed to specialized technicians, prepared to correct use of manual and motorized

utensils and of all security precautions (eyes protection including). Before to use product, insure to read carefully this

instruction guide. For any work on the pump we recommend the use of protective gloves. Disposal of obsolete product must

be in accordance with the rules and regulations applied in te Country of destination. Product guarantee: 1 year.

We thank you a lot for purchase of our cooling pump.

DESCRIPTION

This pump must be use for engine cooling only.

It is perfectly self-priming.

Use with salt or fresh water only.

Pump does not run dry.

TECHNICAL FEATURES

• Pump body: bronze-aluminium

• Impeller: neophrene

• Deliveries: see scheme A

INSTALLATION

Fix pump to engine in accordance with request fixing.

MAINTENANCE

We suggest regularly maintenance of cooling circuit in order to avoid damages caused by

overheat.

It's also important to preserve cooling circuit during outhousing period to avoid damages

caused by cold and corrosion.

N.B. It's better to have maintenance adrift, else can be enter water onboard.

Pump does not run dry.

In case of water filter is mounted on, verify that it is clear and integral.

Impeller: The impeller is very important to safety.

It's necessary to replace it every 500 operating hours at least.

A damaged impeller must be replaced IMMEDIATELY.

We suggest to keep a new impeller with gasket onboard always.

In case malfunction keep on, please do not hesitate to contact our customer assistance office at phone nr +39

029657321.

For any further information you can contact our customer service at telephone no. +39 029657321, or by

mail writing to [email protected]

INSTRUCTION USER GUIDE

After made pump installation in according with Par. "Installation", connect pipe to

inlet connections.

The section of both suction and delivery pipes must respect the pump inlet original

sections.

Dip pipe into liquid and then turn on pump.

After 15 seconds about, pump starts to deliver liquid.

MALFUNCTIONING

• Pump does not start: check if pump connection with engine is correct

• Pump does not vacuum: check liquid level and position of pipe into liquid

• Pump does not much vacuum:

- Check if impeller is damaged or if there are residual inside or if impeller is

unsticked from its insert.

- Check if there are air leakages inside circuit. In order to verify this, check if

outflow from pump has lacteal form, caused by nebulised air inside circuit.

- Verify that inside seal below impeller , is integral and soundness.

In case malfunction keep on , please do not hesitate to contact our customer

assistance office at phone nr +39 029657321.

For any further information you can contact our customer service at telephone

no. +39 029657321, or by mail writing to [email protected]

WARNING

• Do not use Ancor pumps for petrol, gasoline, petroleum products or any product with flash point

below 37°C (98°F)

• Keep product away from children

• Verify that pump is locked strongly before use

• Use pump for described applications only

• Do not vacuum solid part with pump

DECLARATION OF CONFORMITY CE (According to

the Machinery Directive 2006/42/EC, Annex II)

With this documentation the ANCOR srl declares that the equipment together with this document

and shown on the cover are produced and marketed in accordance with the Machinery Directive

2006/42/EC, as amended. All of the product documentation, including drawings and statements of

suppliers for components and processes of the product are kept at the premises of the company and

managed under the Quality Management System in accordance with UNI EN ISO 9001:2008.

Therefore, the ANCOR srl complies with the rule stated above the development of "technical

documentation" of this product.

Caronno Pertusella 01/04/10

Andrea Melgrati

(Legal Representative authorized to compile the technical file)

(address as at Ancor srl)