AND UA-1020 Gebrauchsanweisung - Seite 13
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Blutdruckmessgerät AND UA-1020 herunter. AND UA-1020 20 Seiten.
Auch für AND UA-1020: Schnellstart-Karte (2 seiten)
Seite drucken
Notes for Accurate Measurement
Sit down in a comfortable position. Place your arm on a table with your
palm facing upward and the cuff at the same level as your heart.
Relax for about five to ten minutes before taking a measurement. If you
are excited or depressed by emotional stress, the measurement will
reflect this stress as a higher (or lower) than normal blood pressure
reading and the pulse reading will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you
are doing and what you have eaten. What you drink can have a very
strong and rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very
weak or irregular heartbeat, the device may have difficulty determining
your blood pressure.
Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. Refer to page 5 for the
description of symbols.
This blood pressure monitor is intended for use by adults only. Consult
with your physician before using this device on a child. A child should not
use this device unattended.
The TriCheck mode takes three consecutive measurements automatically
and displays the average values of the three measurements.
Selecting the TriCheck Mode
1.
In the pressure setting mode, press
the SET button to enter the TriCheck
setting mode. The current setting
blinks.
2.
Press the
TriCheck mode ON or OFF.
ON: TriCheck mode
OFF: Normal measurement mode (default value)
3.
Press the START or SET button to
turn the device off. After three
minutes of non-operation, the device
will turn off automatically.
TriCheck Measurement
or
button to turn the
In the pressure setting mode,
English 12
press
The current setting blinks
or
Change the setting
or
START