AND UA-704 Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Blutdruckmessgerät AND UA-704 herunter. AND UA-704 16 Seiten.
Auch für AND UA-704: Gebrauchsanweisung (16 seiten)
Seite drucken
1. Place the cuff on the arm (preferably the left arm).
2. Press the
START
When the
display symbols will display for about one second.
When the " 0 " is flashing, the device is ready for
measurement. If the
has some air trapped in it. Press the exhaust
valve button until the
3. Pressurize the cuff by squeezing the rubber bulb.
The figure on the left of the
display
shows
pressure as you inflate the cuff.
Stop squeezing the rubber bulb
when the
4. When pressurization is completed,
the automatic exhaust mechanism
will gradually reduce the pressure
in the cuff and the
display along with the current
pressure reading on the left.
Remain
measurement. When a pulse is
detected, the
in unison with the pulse of the
person being monitored.
5. When
the
complete, the
The systolic pressure is displayed
on the
left.
displayed on the right. The pulse
rate alternates with the systolic and
diastolic displays.
Measurement
button.
button is pressed, all of the
START
mark is displayed, the cuff
mark is displayed.
the
current
mark disappears.
mark will
still
during
mark will flash
measurement
mark is displayed.
The
diastolic
ENGLISH 7
Stop squeezing the bulb
when the
disappears.
Detecting the pluse,
the mark is flashed.
Current pressure.
Automatic air release.
Gradually being reduced.
the
Measurement in progress.
is
Systolic pressure
Diastolic pressure
is
Pulse rate
START
Squeeze bulb
Bulb
mark
Flashing
Alternating display
To next page
button