AND UB-328 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Blutdruckmessgerät AND UB-328 herunter. AND UB-328 11 Seiten. Wrist blood pressure monitor

Seite drucken

HOW UB-328 WORKS

LifeSource™ Blood Pressure Monitors are easy to use, accurate

and display clear digital measurements. Our technology is based

on the "oscillometric method". The term "oscillation" refers to the

measure of vibrations caused by the arterial pulse, and is a non-

invasive method to determine blood pressure.

Our monitors examine the pulsatile pressure generated by the

arterial wall as it expands and contracts with each heartbeat

against the monitor' s cuff. The cuff inflates until the artery is fully

blocked at which point the monitor takes a measurement as the

cuff deflates.

BEFORE YOU START

The UB-328 provides accurate readings on wrists with a circumfer-

ence between 5.3" and 7.7" (13.5 cm and 19.5 cm).

The unit requires two "AAA" (1.5 volt) batteries to operate. To

install batteries (or to replace when "Low Battery" symbol

appears), proceed as follows:

1. Slide the battery cover as shown to remove

from the device.

2. Insert batteries into designated areas

ensuring a correct match with positive (+)

and negative (-) terminals.

3. Return battery cover by sliding back on to

monitoring device.

E-4

LifeSource Health Line (Toll-Free): 1-888-726-9966

TAKING YOUR BLOOD PRESSURE

Tips for Blood Pressure Monitoring:

Relax for 5 to 10 minutes prior to measurement

Remove watch, jewelry or tight-fitting garments

Use left wrist unless otherwise recommended by physician

Now you are ready to follow these simple steps:

Sit comfortably in a chair near a flat surface.

2. With palm facing upward, attach monitor to

left wrist and fasten securely. The top edge of

the cuff should align with the crease of your

wrist.

3. Position your wrist so it is level with your

heart, using an arm rest if needed.

Positioning of the wrist at heart level is

critical for accurate measurement.

NOTE: To stop inflation at any time, press START

4. Press START button. All symbols will briefly appear, and the

cuff will begin to inflate. It is normal for cuff to feel very tight.

5. Remain still and refrain from talking or moving during reading.

NOTE: If a reading is not correctly detected, the device will start

to automatically re-inflate.

In Canada (Toll-Free): 1-800-463-5414

E-5