formlabs Form Wash Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für 3D-Drucker formlabs Form Wash herunter. formlabs Form Wash 13 Seiten.

TOOLS & STORAGE

A Flush Cutters.

B Removal Tool.

PreForm to release the base of your parts from the build platform.

C Hydrometer.

Float in IPA to measure the IPA's resin concentration,

based on previous calibration in fresh IPA. See page 5.

D Scraper.

Can be used to remove parts from the build platform, as well

as to carefully clean and inspect the resin tank for cured material.

E Tweezers.

Use to handle small parts or to manipulate supports

after printing.

F Siphon Pump.

storage container. See page 9.

Use to carefully remove support tips from printed parts.

Apply pressure under the base generated by

Transfer IPA between the wash bucket and an IPA