Dreame DreameBot L10 Prime Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Staubsauger Dreame DreameBot L10 Prime herunter. Dreame DreameBot L10 Prime 11 Seiten. Robot vacuum and mop with automatic mop cleaning

Seite drucken

Connecting with Dreamehome App

This product works with the Dreamehome app which can be used to control

your device.

Scan the QR code on the robot, or search for "Dreamehome" in the app store to

download and install the app.

QR Code

2. Add Device

Open the Dreamehome App, tap "

" in the upper right corner, and scan

the QR code above again to add "DreameBot L10 Prime". Please follow the

prompts to finish the Wi-Fi connection.

Wi-Fi Indicator

· Blinking slowly: To be

connected

· Blinking quickly: Connecting

· On: Connected

Note:

• Only 2.4GHz Wi-Fi is supported.

• Due to upgrades in the app software, the actual operations may differ

from the directions in this manual. Please follow the instructions based on

the current app version.

3. Reset Wi-Fi

Simultaneously press and hold the

and

buttons until you hear a

voice prompt say, "Waiting for the network configuration." Once the Wi-Fi

indicator is blinking slowly, the Wi-Fi has been successfully reset.

Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and

add the device again.

How to Use

Fast Mapping

After configuring the network for the first time, follow the instructions on the

app to quickly create a map. The robot will start mapping without cleaning.

When the robot returns to the base station, the mapping process has been

completed and the map will be saved automatically.

Turn On/Off

Press and hold the button for 3 seconds to turn on the robot. The power

indicator should be illuminated. Place the robot onto the base, the robot

should turn on automatically and begin charging. To turn off the robot, move

the robot away from the base and press and hold the button for 3 seconds.

Pause/Sleep

When the robot is running, press any button to pause it.

If the robot is paused for more than 10 minutes, it automatically enters sleep

mode. The power indicator and charging indicator will turn off. Press any

button on the robot or base, or use the app to wake up the robot.

Note:

· The robot will turn off automatically if it is left in sleep mode for more than

12 hours.

· If the robot is paused and placed onto the base station, the current

cleaning process will end.

Do Not Disturb (DND) Mode

When the robot is set to the Do Not Disturb (DND) mode, the robot will be

prevented from resuming cleaning and the power indicator will go out. The

DND mode is disabled by default at the factory. You can use the app to enable

the DND mode or modify the DND period. The DND period is 22:00-8:00 by

default.

Note:

· The scheduled cleaning tasks will be performed on time during the DND

period.

· The robot will resume cleanup where it left off after the DND period expires.

Spot Cleaning

When the robot is on standby, briefly press the button

to enable spot

cleaning mode. In this mode, the robot will clean a square-shaped area of

1.5 × 1.5 meters around it and return to its starting point once spot cleaning is

completed.

Robot Restarting

If the robot stops responding or cannot be turned off, press and hold the

button for 10 seconds to force a shutdown. Press and hold the

button for 3

seconds to turn the robot back on.