Athos Box Easy Power Gebrauchsanweisung

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Tragbarer Generator Athos Box Easy Power herunter. Athos Box Easy Power 3 Seiten. Automatic cable rewinding system with housing

Seite drucken

ATHOS Box Easy

Automatic

cable

rewinding system with housing

Art.no. 5-155-006-01

Instruction manual

Introduction

Please read these operating instructions completely

before use/installation, keep it in a safe place and

pass them on to third parties if necessary.

Intended use

The unit is designed as an automatic cable rewind system in a housing with an extendable cable and plug. An earthing con-

tact plug connects the unit to the mains supply and a WIELAND GST 18 socket can be used to supply appliances, furniture,

etc. with power.

The ATHOS Box Easy Power is only approved for dry indoor areas. Any other use or modifi cation of the unit is con-

sidered improper and involves a considerable risk of accident. The manufacturer accepts no liability for damage resulting

from improper use.

Scope of delivery

Immediately after unpacking, check that the scope of delivery is complete and that the unit is in perfect condition.

• 1x ATHOS Box Easy Power with cable management with automatic rewind.

• 4x aluminium rails incl. 8 black cover caps.

Optional accessories (see page 2 and illustrations on page 3) can be ordered separately.

Technical Data

• According to DIN EN 61242:1997+A1:2008+A2:2016+A13:2017

and certifi ed according to 2014/35/EU Low Voltage Directive

• Operating voltage:

• Overheating protection: Yes

• Protection class:

• Protection type:

• Cable length:

• Cable type:

• Max. Load:

• Overload protection:

• 1x WIELAND socket GST 18

Assembly

• We recommend using the ATHOS Box Easy Power in a vertical orientation and positioning the cable inlet at the top

(1). The cable inlet can only be at the bottom if it is installed near

the ﬂ oor (2).

• The ATHOS Box Easy Power has four aluminum rails on the

corners of the housing. Mounting brackets, screws and slot

stones (see Fig. "Fastening material" on page 3) are available

as optional accessories that are not included in the scope

of delivery.

• These are mounted on the aluminum rails on the housing. The

mounting brackets can be ﬂ exibly rotated, adjusted and fi xed

with a screw using the slot stones inserted into the rail. The

black cover caps on the sides do not need to be removed

for this.

• You can then attach the rewinder to walls, appliances or fur-

niture etc. in diff erent ways (see sketches & pictures on page

3). For this, please use separate, suitable fastening material

(such as dowels and special screws).

Power

230 V / 50 Hz

IP20

7.0 metres usable

H05V2V2-F3G1.0

Rolled up 1,000 watts / 4.4 A

Unrolled 2,000 watts / 8.7 A

10 A reset fuse

215

- 1 -