Carmanah SpeedCheck-18 Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Radar Carmanah SpeedCheck-18 herunter. Carmanah SpeedCheck-18 16 Seiten. Led display
Auch für Carmanah SpeedCheck-18: Handbuch für den Austausch von Schranktüren (10 seiten), Ersatz-Handbuch (14 seiten), Handbuch installieren (18 seiten), Handbuch installieren (12 seiten), Ersatz-Handbuch (11 seiten)

SPEEDCHECK-15/18 – Current Power Cabinet

3.1

Circuit

breaker

1. Access the inside of the power cabinet and switch the circuit breaker to the off position. It is also

recommended to disconnect the AC power source coming into the cabinet if possible.

2. Remove the input and output wiring from the existing power supply and set aside to reuse.

3. Remove the two mounting screws and set aside to reuse.

4. Remove existing AC-DC power supply and install the replacement. Note the orientation of the power

supply with the DC output facing up in the cabinet.

5. Reinstall the two mounting screws and secure the power supply.

6. Reinstall the input (AC) and output (DC) wiring harnesses removed from step 2. Ensure the AC wiring is

terminated at the terminals labelled as AC/N (neutral, white wire) and AC/L (line, black wire).

7. Reconnect the AC power source (if disconnected) and switch the circuit breaker to the on position.

8. Wait for traffic to activate the system and ensure radar is working properly.

a. It may take up to 60 seconds to confirm all LED segments are operational during the start-up

procedure and before traffic will be detected.

9. Fully close the cabinet door. Pull back on the door to make sure it is now closed and locked.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

SPEEDCHECK AC-DC POWER SUPPLY

REPLACEMENT GUIDE

carmanah.com

DC output

AC-DC power

supply

AC input