ATI Audio DA206 Betriebs- und Wartungshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungshandbuch für Verstärken ATI Audio DA206 herunter. ATI Audio DA206 6 Seiten. Analog audio
distribution amplifiers
Auch für ATI Audio DA206: Betriebs- und Wartungshandbuch (5 seiten)
Seite drucken
SPECIFICATIONS FOR DA206 AND DA412
OUTPUT LEVEL:
DISTORTION:
SLEW RATE:
RESPONSE:
NOISE:
GAIN:
CROSSTALK:
OUTPUT ISOLATION:
OUTPUTS:
INPUTS:
POWER:
SIZE:
SHIPPING WEIGHT
MODELS AVAILABLE:
ATI Audio Inc.
■ Tel: 856-719-9900 ■
+22dBm peak into 600 ohm balanced load
+18dBm peak, typical, into unbalanced loads
THD .10% maximum, 20 to 20,000Hz at peak output
IMD .05% maximum, SMPTE measurement
13 Volts per microsecond
± .25dB, 20 to 20,000Hz
-95dBm out at maximum gain, 20kHz bandwidth
40dB maximum
70dB minimum at 10kHz, any path
70 dB minimum at 1kHz. A shorted output does not
affect any other output.
Active balanced, servo controlled, ground sensing, 50
Ohm output impedance, DC coupled. XLR type male
connectors, Pin 2-HI, 3-LO, 1-GND.
20Kohm active balanced, split and RF bypassed.
+22dBm maximum input level, 60dB CMR at 60Hz.
XLR type female connectors, Pin 2-HI, 3-LO, 1-GND.
115/230 VAC ±10%, 47 - 63Hz, 20VA; use .5A,
250VAC fuse, UL listed, ¼ D x 1-1/4 inches long
19" (48.3cm) W X 1.75" (4.45cm) H X 7.5" (19cm) D
DA206: 5 lbs. (2.3kg)
DA412: 6 lbs. (2.7kg)
DA206 Dual 1X3 Active balanced outputs
DA412 Quad 1X3 Active balanced outputs
Fax: 856-504-0220
■
www.
audio.com