Carmanah E Series Handbuch installieren - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch installieren für Beleuchtungsanlagen Carmanah E Series herunter. Carmanah E Series 16 Seiten. Rrfb mast arm kit
Auch für Carmanah E Series: Schnellstart-Handbuch (20 seiten), Handbuch zum Austausch des Energiemanagementsystems (12 seiten), Handbuch installieren (20 seiten), Benutzerhandbuch (18 seiten), Ersatz-Handbuch (9 seiten), Handbuch installieren (18 seiten)

14. Install the wires into the terminals as follows:

•

Violet → 3-position splice terminal with red wire going to PBS+

•

Blue → EXT1

•

Red → Middle BAT+

•

Black → Middle BAT-

15. Align ends of heat-shrink on both harnesses near end of sheet metal tab. Install a cable tie around both

harness and sheet metal as shown below

If the system has a pushbutton, insert the positive pushbutton wire into the empty position of the

3-positio splice terminal.

16. Remove red solar panel wire from the PV+ terminal. Insert red wire into 3-position splice terminal.

17. Insert one end of 3" yellow wire from step 2 into PV+ terminal. Insert other end of 3" yellow wire into 3-

position splice terminal.

18. Insert yellow wire from AI 16-pin harness into third splice terminal position.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com