ATI DIGITAL AUDIO DDA416-XLR Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken ATI DIGITAL AUDIO DDA416-XLR herunter. ATI DIGITAL AUDIO DDA416-XLR 9 Seiten. Series 3 ultra-low jitter 192 khz quad 1x4 aes/ebu distribution amplifier

Seite drucken

SAFETY INFORMATION

To reduce risk of electric shock, do not remove covers. There are no user-serviceable items inside. Please refer
servicing to qualified personnel.

UNPACKING

Examine all shipping cartons for external damage and retain all damaged cartons for inspection by the carrier.
Examine all equipment for any sign of damage. Do not connect AC mains power to a unit which appears to be
damaged. Contact the carrier to file a damage claim.

INSTALLATION LOCATION

This equipment must be installed in a location meeting the environmental conditions specified below. Adequate
cooling must be provided if units are to be operated in high temperature locations. Exposure to liquid and
condensation must be avoided.

GROUNDING

This equipment is connected to earth through the center conductor of the AC mains cable. Proper grounding
protects operators from electric shock, and it must be maintained whenever the unit is connected to AC.
ELECTROMAGNETIC COMPATIBILITY
This unit complies with electromagnetic requirements described in 89/336/EC and FCC Part 15. This unit does
not generate undue electromagnetic interference, and is adequately protected against electromagnetic
interference so that it can operate properly.

MAINTENANCE

This unit requires no maintenance other than periodic wiping with a soft dry cloth to remove any dust or
contaminating substances. Do not use solvents for cleaning.

DECLARATIONS OF CONFORMITY

Class A Equipment – FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules.
CE Declaration of Conformity
ATI Audio Inc., West Berlin, New Jersey 08091 USA, declares that all Model DDA416-XLR units are in
conformity with the following EU regulations and amendments:
Low Voltage (LVD) 73/23/EEC and 93/69/EEC
Electromagnetic Compatibility (EMC): 89/336/EEC and 92/31/EEC and 93/68/EEC
This equipment is also in conformity with the following standards and documents:
Safety: EN 60950:2001 (Class I Equipment)
Safety of laser products: EN 60825-1:1994 and A11 and A2, EN60825-2:2000
EMC: EN55103-1/-2:1996, electromagnetic environments E2 and E4.
3
D DA416-­‐XLR   M anual