ATI Electronics H6 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer ATI Electronics H6 herunter. ATI Electronics H6 18 Seiten. Bluetooth wireless headset

Seite drucken

Charging the battery

This headset has an internal, non-removable, rechargeable battery. Do not attempt to remove

the battery from the device as you may damage the device. Please refer to the following step to

charge the battery:

1. Connect the charger to the correct outlet.

2. When the charger is connected to headset, the red indicator

light will turn on during charging. If charging does not start,

disconnect the charger, plug it in again. Charging the battery

fully may take up to 2 hours.

3. When the battery is fully charged, the red indicator light turn blue.

Disconnect the charger from the headset and the wall outlet.

NOTE:

The fully charged battery has power for up to 4-6.5 hours of talk-time or up to 120-150 hours

of standby time. However, the talk and standby times may vary when used with different

mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and

environments.

When battery power is low, the headset will remind you by beeps every 20 seconds, and the

red indicator light starts to flash.

For first time use, please charge the headset fully. If you can not see the indicator light while

charging, please leave the headset on the charging for a while, then the indicator light will

turn on.