Formula NERO R Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Zubehör für Fahrräder Formula NERO R herunter. Formula NERO R 17 Seiten.

INSTALLATION

WARNING: Installation of NERO suspension forks requires specific knowl-

edge, equipment and expertise. General mechanical skills are not sufficient

to correctly install the NERO suspension forks.

FORMULA strongly recommends that a qualified service center authorized by

FORMULA install the fork on your bicycle. Improperly installed forks can cause

damage to the NERO suspension and serious injury or death.

-FORMULA does not authorize the end user to

install the fork on the bike.

WARNING: Failure to follow these guide-

lines may result in serious injury or death.

2.1 Installing the hose clamp

-Secure the disc brake hose to the fork with clamp

(8).

-Loosen the screw (9) and move the clamp over

the hose (8).

-Insert the hose inside the hose clamp (8).

-Tighten to 2/3 Nm.

USE

GENERAL SAFETY NOTE: Do not keep the

fork fully at the end of the race for a period

exceeding 10 days.

If that happens you can verify that the hydraulic

system is not working properly.

3.1 Suspension Adjustments

-Use the rebound adjuster (10) to adjust how

quickly the fork returns to its extended position

after being compressed.

-Correctly setting the rebound speed allows the

bicycle to properly track the terrain.

-Rebound that is set too fast will cause the fork to

feel springy and uncontrolled and exhibit exces-

sive return speed

-Rebound that is set too slow will not allow the fork to extend quickly enough to

prepare for the next bump.

-Turning the adjuster (10) clockwise (toward the + sign) adds hydraulic damping and

slows the rebound speed.

-Turning the adjuster (10) counter-clockwise (toward the - sign) removes hydraulic

damping and speeds up the fork rebound speed.