Andatech AlcoSense PRO Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte Andatech AlcoSense PRO herunter. Andatech AlcoSense PRO 9 Seiten. Personal breathalyser

Seite drucken

a. Allow at least 20 minutes after eating or drinking before testing. Any type of

alcohol remaining in the mouth of saliva may interfere with proper testing and

requires about 20 minutes to disperse. This includes alcohol-based mouthwash or

similar products.

b. Avoid testing in high wind conditions or in poorly ventilated or enclosed spaces.

Poor ventilation may also lengthen the time required for warm up between tests.

c. Do not blow smoke, saliva or other contaminants into the mouthpiece, as the

sensor may become damaged. Wait at least 20 minutes after smoking before

conducting a test.

d. Do not use the Pro breathalyser as a tool to drink and drive.

e. Do not blow fluid into the instrument as it will damage the sensor and void your

warranty.

f. Do not store in an extreme environment where high temperature or high humidity

exists. Keep out of the reach of children.

g. To maintain accuracy, we recommend professional recalibration every 6 months.

h. Blood alcohol concentration can continue to rise for up to 2 hours after the cessation

of drinking. If a caution result or a result is close to the designated BAC, it is

recommended to wait and retest after 20 minutes.

i. It can take 10 hours or more for the alcohol level to return to a zero after a high

blood alcohol level has been reached. A further test should be carried out later in the

day of the following morning.

j. WARNING DISPLAY – FLO: If you see

not strong enough for measurement. Please power up the unit again and make sure

the breath is strong and steady during sampling.

k. WARNING DISPLAY – CAL or SEN: If you see

requires recalibration or maintenance. Please head to my.andatech.com.au to book

it in, or call 1300 800 200.

l. WARNING DISPLAY – BAT: If you see

battery power is low. Please replace the batteries. Remove the battery cover at the

bottom of the unit and replace the old batteries with two new 1.5V AA batteries. Make

sure to properly align the batteries by looking at the +/- marks.

m. User-serviceable batteries safety:

• Do not dispose of batteries in a fire.

• Do not recharge a battery unless it is specifically marked "rechargeable".

• Do not expose the AlcoSense

• Do not mix old and new batteries, or mix different types or makes of batteries.

• Do not allow children to play with the batteries.

in the display, the breath sample was

in the display, the unit is indicating that

Pro or batteries to heat source.

in the display, the unit