CommScope 864 FDH RESKIN KIT Installationsanleitung Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Industrielle Ausrüstung CommScope 864 FDH RESKIN KIT herunter. CommScope 864 FDH RESKIN KIT 9 Seiten.
Seite drucken5
Remove damaged cabinet
5.1
Open FDH with can wrench.
Cabinet - Doors Closed
5.2
Inspect the internal parts of the FDH. The swing frames need to be in good condition.
Check Condition of Swing Frames and Center Post
Note: If the riser is damaged a new riser kit will need to be ordered separately.
Tools required for installation:
-
5/32" Hex Head Bit
-
9/16" Socket Wrench
-
3/8" Socket Wrench
-
Can Wrench
-
Large Phillips Screwdriver
5.3
Remove front hex head screws. Note: Retain all mounting hardware and ground wires for later re-use.
Hardware Removal on Front Side
Page 2 of 9
© 2021 CommScope, Inc. All Rights Reserved
Cabinet - Doors Open
Tool List