Andea Electronics RL863 Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kartenleser Andea Electronics RL863 herunter. Andea Electronics RL863 18 Seiten. Micro-power multi-protocol reader
Seite drucken
Note:
Step 1: Select the menu "ISO Multi-Tag Test" in the main interface of the software;
Step 2: Select the "Inventory " in the drop-down list above the "Start" button;
Step 3: Click the "Start" button to carry out the inventory testing.
5.2.2. Single Tag Operation Testing
After entering the main interface of R-Tool test software, select " Single Tag Test" ,
carry out the procedure as shown in the following figure ①,②,③,④ and ⑤ for tags
test:
Note:
Step 1: In the software main interface, select the menu "Single Tag Test";
Step 2: In the "Single Tag Test" interface, select the type of tag to be operated;
Step 3: mode: none address, address.
1) For a single tag, select the "none address" mode.
2) For multiple tags, select the "address" mode.
Step 4: Click the "Inventory" button to display the UID list in UID drop-down box.
Step 5: 1) For a single tag: click the "Connect" button;
2) For multiple tags: in UID drop-down box, select the tags required to be
operated, and then click the "Connect" button;
Guangzhou Andea Electronics Technology Co., Ltd.
http://www.gzandea.com
Figure 12 Single tag operation test steps
User manual
11/15