ATI Technologies AT1822 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken ATI Technologies AT1822 herunter. ATI Technologies AT1822 14 Seiten.
Seite drucken
Rear Panel Layout
A
B
C
I
H
A. Balanced (XLR) Audio Inputs
Use the BALANCED INPUT jacks to connect to the
outputs of a preamplifier or other control device with
XLR outputs. The XLR jack is wired Pin 1 - Ground,
Pin 2 - Hot, and Pin 3 - Cold.
B. Unbalanced (RCA) Audio Inputs
Use the UNBALANCED INPUT jacks to connect to
the outputs of a preamplifier, receiver with preamp-
out connections, CD player, or other source device
with RCA style outputs.
C. Input Selector Switch
Selects either the BALANCED INPUT (XLR) or the
UNBALANCED (RCA) INPUT jack.
D. Remote Trigger Input
Use the REMOTE TRIGGER jack to connect to a
compatible preamplifier, source device, or other
product with a 3.3-24 VDC output.
E. Chassis Ground Terminal
Use to connect to other chassis where necessary.
Amplifier Channel To Speaker Map
AT1820 Manual
Amplifier Channel
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
F. Circuit Breaker / Main Power Switch
G. AC Inlet
Use the included power cord to connect your amplifier
to an AC power source.
H. Speaker Outputs
Use the OUTPUT binding posts to connect the amplifi-
er to your speakers. The post with the red accents is
positive. The post with the black accents is negative.
I. Channel Name Label
ATI provided labels that use standard speaker location
names to mark the amp and wires to make install and
debugging easier.
J. Power Configuration Label
Calls out AC voltage and frequency, power consump-
tion and circuit breaker trip current.
Speaker
5
D
E
F
G
J
Rev-05/21